| |
Special Production Request
Required for Ordering
Please do not hesitate to contact us for any support
issues. This trainer range is now discontinued and
only available on special production request.
Please see our newer product range
for alternate. This range is based on linear power
supply and single sided board with reverse side
jumpers |
|
 |
|
DEV-2765 carries all
essential elements of circuit
patching , no separate equipment is
required. Hands on experience on
this trainer will go a long way in
professional growth of the students.
- Fixed
DC power supplies:
+ 5V, -5V, +12V and - 12V. Each
one of these output voltage is
available at its corresponding
10-pin jack from where it can be
extended through jumper wire to
any desired circuit.
-
Function Generator:
Sinusoidal, square and
triangular waveforms within
variable frequency range of 0.1
Hz to 300 kHz variable. In
addition, provision has been
made available for the user to
conveniently add a capacitor of
suitable value to the Function
Generator circuit in order to
get any desired frequency.
- Logic
Switches and Status LEDs:
12 SPDT slide switches with
logic indicators have been made
available on the trainer.
Depending on the switch
position, a logic high or logic
low becomes available on the
corresponding output socket from
where it can be extended through
jumper wire to any digital
circuit input.
-
Potentiometers:
10 KO and 80 KO potentiometers
have been made available which
can be used as sources of
variable resistance.
- Seven
Segment Display:
Four 7-segment displays with BCD
input sockets.
-
Relays:
Two electronic relays that
operate with 5VDC for switching
or controlling external devices.
- Mic:
Any audio input to the mic can
be given at a 10-pin jack made
available for this purpose.
-
Speaker:
The sound of the audio input can
be heard from the speaker.
- Logic
Probe:
Logic probe, with two LEDs, has
been made available to monitor
logic levels in any circuit.
- I/O
Sockets:
10-pin female sockets at
convenient places for extending
inputs/outputs through jumper
wire.
-
Breadboard:
Two standard breadboards for
patching electronic circuits.
-
Accessories:
Power cord, circuit patching
wire, user manual and dust
cover.
-
Casing:
High impact ABS molded case of
dimensions 9 cm H x 34 cm W x 36
cm D
|
|
|
|
|
